Non Woven Fruit Bag Making Machine With Wire Ironing

The Non Woven Fruit Bag Making Machine With Wire Ironing produced by EZ TECH, featuring two models: ZXL-BS2-700 and ZXL-BS2-800, is designed to meet various production needs. The machine can accommodate raw material widths ranging from 500mm to 1600mm, with a maximum bag height of 680mm. It can produce bags for a wide range of fruits such as cherries, grapes, to oranges and watermelons. The production speed can reach up to 100 pieces per minute, which is nearly twice as efficient as ordinary models. It is also compatible with non-woven fabric with a weight of 20-100g/㎡. The voltage support is 380V/220V, which is universal and suitable for most domestic workshop power supply environments.

MACHINE PARAMETERS

Performance process advantages

The equipment is equipped with a dedicated iron wire conveying and hot pressing module. It can automatically position and press the iron wire at the edge of the bag opening, ensuring a smooth and firm press without any issues of wire detachment or deviation. The produced bagging does not require additional threading or manual sealing. When fruit farmers apply the bagging, they can simply twist it to fix the bag opening, significantly improving the efficiency of field bagging and reducing labor costs.

The multi-axis servo synchronous control system is adopted, ensuring synchronized and precise operation of the feeding, heat sealing, cutting, and wire pressing processes. The production speed remains stable at 40-100 pieces per minute. Even during long periods of high-speed operation, there will be no deviation or material breakage. The overall frame of the equipment has been reinforced and thickened. Key components are selected from industrial-grade components. It can operate continuously without failures and easily meet the rush production demands for large quantities of orders during the peak season of fruits and vegetables.

For the 20-40g/㎡ lightweight non-woven fabric raw material, the Non Woven Fruit Bag Making Machine With Wire Ironing adopts the zone temperature-controlled hot pressing technology. The heat-sealed edges are firm and do not come loose. Meanwhile, the iron wire pressing module adopts a flexible pressing design, which can ensure a tight adhesion between the iron wire and the bag body, and will not damage or tear the lightweight bag body, achieving a balance between production efficiency and product qualification rate.

The raw material widths of the two models range from 500-1300mm to 500-1600mm respectively. The bag widths cover 100-800mm. The bag heights can be adjusted from 200mm to 680mm. They can be used to bag fruits and vegetables ranging from small berries to large melons. Without the need to frequently replace equipment or molds, they can meet the bagging production needs of different types of fruits and vegetables, reducing the equipment investment cost.

It is equipped with an independent touch control panel. Parameters such as bag height, bag width, speed, heat sealing temperature, wire position, etc. can all be set and adjusted with one click. In case of faults, automatic alarm prompts will be given. There is no need for complex debugging procedures. Ordinary workers in the workshop can operate independently after simple training. At the same time, the equipment is reserved with maintenance access ports. The key components can be disassembled and assembled conveniently, and the later maintenance is time-saving and labor-saving.

Differential selling points

1. The wire pressing accuracy is high, without damaging the bag body and the sealing is firm.

Compared with ordinary wire ironing equipment on the market, the wire pressing module of this Non Woven Fruit Bag Making Machine With Wire Ironing adopts high-precision positioning and flexible pressing design. The error of the adhesion between the wire and the bag body is extremely small, and the pressed area is flat without protrusions. It will not scratch the workers or the fruit skin, and can ensure that the wire will not fall off during the sealing process, solving the pain points of traditional bagging that is prone to opening and leakage of insects.

2. Consistency guarantee for finished products under high-speed production

The multi-axis servo synchronous control system ensures that the errors in feeding, cutting, and wire pressing are within a very small range. Even under a high-speed production rate of 100 pieces per minute, the size, heat sealing strength, and wire position of each bag can maintain a high degree of consistency, significantly reducing the defect rate and reducing raw material waste.

3. Balancing the dual needs of bagging ventilation and protection

The non-woven bag produced by the equipment retains the natural ventilation property of the raw material, with uniform bag body pores, which can reduce the rotting problem caused by heat and water vapor accumulation of fruits; at the same time, after the bag mouth wire is tightened, it can effectively isolate external dust, pests, and reduce pesticide residue contact, improving the appearance of fruits and meeting the packaging standards for high-end fruits.

4. Modular structure design, supporting subsequent function expansion

The equipment adopts a modular structure and reserves expansion interfaces for punching, printing, etc. It can be equipped with ventilation hole punching devices and single-color printing devices according to customer needs, achieving integrated production of bagging ventilation holes and brand information, meeting the personalized order requirements of customers without the need to purchase additional equipment.